No One Support

Connect Fritz 7530 or 7590 to the Internet. FTTP/Full Fibre

I’m going to show you how to connect your Fritz 7530 or Fritz 7590 broadband router so that you can get on the internet via No One Internet.

This is for connecting full fibre or FTTP – fibre-to-the-premises or fibre-to-the-home

As of late 2020 when No One Internet send out their broadband routers they are all preconfigured with your unique broadband username and password. All you need to do is plug the router in. If you factory reset the router it will automatically connect to No One Internets platform and download your settings again, enabling you to connect to the internet without needing to log in to the router.

The process for connecting the 7530 and 7590 are similar.

The first thing to do is locate your ONT. The lovely engineer from Openreach may, or may not help you connecting your router. Assuming the engineer just leaves the ONT you need to simply plug an ethernet cable (this will have been supplied with your router) in to the ethernet port at the bottom of the ONT and then connect the other end to LAN4 on the 7530 (as shown) or the WAN port on the 7590 (as shown).


ETHERNET CABLE PLUGS INTO ETHERNET PORT ON OPENREACH ONT (IN THIS INSTANCE THE RED CABLE IS THE ETHERNET CABLE)




FRITZ 7530 – PLUG THE OTHER END OF THE ETHERNET CABLE – FROM THE ONT IN TO LAN4. LAN4 IS MARKED ABOVE ON THE ROUTER BUT IS THE LAST YELLOW PORT ON THE RIGHT. IT WILL NOT WORK IN ANY OTHER PORT



 

FRITZ 7590 – PLUG THE OTHER END OF THE ETHERNET CABLE – FROM THE ONT IN TO WAN PORT (IN THIS EXAMPLE THE WAN PORT ALREADY HAS A RED ETHERNET CABLE PLUGGED IN TO IT). IT WILL NOT WORK IN ANY OTHER PORT.


Plug the router power in and wait 5 minutes. After 5 minutes you should be connected to the internet.

Most people connect to the internet wirelessly and both routers have built in WiFi. If you turn your router over you will see the SSID and password. Search for this SSID from your phone, laptop, or tablet, put the password in and you should be connected wirelessly and be able to access the internet. You can also use the QR code on the back of the router to connect automatically.



If you have any problems at all. Please give No One a call on 03333440630or email support@noone.co.uk



    • Related Articles

    • Connect Fritz 7530 or 7590 to the Internet. FTTC/ADSL

      I’m going to show you how to connect your Fritz 7530 or Fritz 7590 broadband router so that you can get on the internet via No One Internet. This is for connecting either FTTC or ADSL. As of late 2020 when No One Internet send out their broadband ...
    • Connecting a Fritz Repeater 300 to your Fritz Router

      Having the fastest connection is no good if you can't deliver WiFi where you need it. The Fritz Extender 3000 is a great WiFi extender that can deliver WiFi throughout your home. Please have a look at the video below as it gives detailed instruction ...
    • Broadband - What am I buying?

      In the UK there are 3 types of broadband ADSL, FTTC, or FTTP. Two of these use technology that is based on the old dial up modem days! For those who don't remember this, these were the boxes that made strange beeping and whooshing noises when ...
    • Getting the most out of WiFi and troubleshooting

      Good WiFi and good broadband speed have become synonymous with each other. We read about it all the time. My internet is rubbish, or my WiFi is rubbish but what does that mean? If someone says "My WiFi is rubbish" are they referring to the strength ...
    • The Network is King

      In our previous blog posts I have talked about getting a connection from your house to our core network. In this post I want to look at what is a ‘core network’ and what makes a difference when wanting a low latency, high bandwidth connection to ...